Skimo Co
SkyRun

Dynafit Plates & Bases

From $9.95

In Stock & Ships Today

Free shipping over $50

Toe plates, heel plates, extension plates, and more. These are all the parts you need to make new those hand me down Radical or Vertical bindings. Please note that heel bases with integrated brakes are listed in our brakes section.

Speed Radical Heel Base - Adjustable base with tower that holds Speed Rad heel housings.

Radical ST Toe Plate - The plastic riser plate under the Radical ST 1.0 toe piece, also works to shim the Speed Radical.

Radical FT Toe Plate - Almost the same plate as above, but not quite; specifically for the Radical FT 1.0.

Radical FT Connector Plate - The stiffening connector between the toe and heel, complete with a shock absorbing lockout. V1.0 bindings.

Radical 2.0 Toe Plate - The front rotation unit under the toe of the Radical 2.0 and Beast 14 bindings.

Radical FT 2.0 Toe Plate Extension - The support platforms around FT 2.0 toes that distribute force over a wider area. Can upgrade ST 2.0 toes.

Speed / Blacklight Long Rail - Increase the adjustability range on the heel of your Speed or Blacklight binding to a whopping 60mm with a pair of these. Note this plate is not compatible with the Blacklight / Speed brakes!

All bases and plates are sold individually (x1) (Except the Speed / Blacklight Long Rail, which comes as a pair).

Related Products

» Browse more Dynafit Binding Parts 

Questions & Reviews

5/15/2024
Question from Felix Eriksson
 
Hi, I've broken the plate under the toe on one of my Radical FT 2.0 bindings. I think it would be the part that's called "Radical FT 2.0 Toe Plate Extension". I see that you mention it in the product description, but it's not visible in the drop-down menu. Is there any chance that you still stock this, or can get a hold of it?

Kind regards,
Felix Eriksson
5/15/2024
Answer from Jeff
 
Felix, No, that part is long gone. Those pieces are superfluous, just added to the FT version to make it look more powerful.
Answer this question:

5/1/2024
Question from brian b
 
Hello gang. I have a broken centering tab on my radical 2.0 (fischer branded). In need of new toe base plate. On you website radical 2.0 toe plate does not appear. Can you assist? maybe operator error:). tx!
5/3/2024
Answer from Emmett I
 
Hi Brian, not there because it hasn't been sold separately. I haven't ever even taken one apart. The original 2.0 version didn't have a centering tab, it turned freely. A bit more difficult to step in, but works perfectly well.
5/3/2024
Answer from brian b
 
tx...i don't think i was clear. What is broken on this 2.0 toe plate is the Centering tab for the ski crampon (little plastic piece). So I am just trying to replace the 2.0 toe plate so my ski crampon doesn't slip left and right. tx!
Answer this question:

2/9/2024
Comment from OSCAR
 
The 19mm screws for install radical st plate in speed toe are 5,5 mm,the original Dynafits screws are 6.0 mm,so not tight correct.
2/9/2024
Reply from jbo
 
Hi Oscar, the ISO spec for ski screws is 5.5mm wide.
Reply to this comment:

1/24/2024
Question from Evan
 
How much do the Speed/Blacklight long rails weigh? Do they add much vertical height?
1/25/2024
Answer from Gabriel I
 
Hi Evan, they are 36g per side, plus 9g in screws (6 screws per plate rather than 4). Vertical height is the same as the stock plate.
Answer this question:

1/10/2024
Question from Bjorn J
 
Howdy!
What screw would I need to pair with the Radical ST toe plate being used to shim a pair of Speed Radicals?
Best,
Björn
1/11/2024
Answer from Emmett I
 
Bjorn,

You'll want the 19mm Torx screw found here.
Answer this question:

2/14/2023
Question from Scott B
 
Awesome website!

I have the Dfit ST 10 rotation demo bindings. Is it possible to replace the toe demo plate and remove the toe assembly to mount them on a rad 2.0 base to make them back to standard configuration?

Thanks in advance.

You guys rock!
2/14/2023
Answer from Emmett I
 
Scott,

Looks like you might be able to unscrew the rotating part of the toe and put it on a radical 2.0 toe, but we don't have one here to double-check with. We do sell the toes individually here, which is a lot simpler.
2/15/2023
Answer from Scott B
 
Kewl, i was thinking i may go that route.
Answer this question:

2/8/2023
Question from Ed W
 
I managed to break both my Dynafit Speed Turn 2.0 heel pieces (by skiing with them in boots that were slightly too small - aka the heel gap was too large). The heel binding adjustment screw broke on both. See photos. Is the Speed Radical heel base the best option? Is that compatible with the Dyanfit Speed Turn 2.0? Can this replacement be done without specialty tools?

Thanks so much!
2/8/2023
Answer from jbo
 
Hi Ed, they are not cross-compatible. I set you up with a notification for when more Speed Turn bases arrive, should be by next week.
2/8/2023
Answer from Ed W
 
thanks for the quick help, jbo!
Answer this question:

5/27/2022
Question from Jon
 
Hello hi hey!
Just found your website... what a terrific resource!

VINTAGE BINDING ALERT!

I'm trying to get some more life out of these Tourlite Tech bindings (any idea what model/year these bindings are?) currently mounted on dynafit tour lite rally skis (see next post's photo) for a vintage skimo race set up :)

As you can see in the photo, the plastic heel plate has cracked at the corners of 3 of the 4 screw holes. They might last for a while, or they might crack catastrophically this weekend. What would you recommend for replacing the heel plates? Do you have something that will work?

Thanks!
5/27/2022
Answer from Jon
 
photo of dynafit tour lite rally skis
5/27/2022
Answer from Jeff
 
HI Jon,
Thanks for the Vintage binding photos. You have TLT Speed binding. They ran from 2002-2005, I can't say which year the green was from. The base plate would also be the same as the TLT Comforts. Sorry, we do not have any of those in our used parts currently.
5/27/2022
Answer from Jeff
 
PS, One cracked hole would be OK, 3 broken mounting holes, I would not trust for long. You can email me at help@skimo.co and I can set you up for notification, if we get one in for parts. But that is VERY seldom.
Answer this question:

4/24/2022
Question from Gon
 
Is the Speedfit toe plate compatible with the Dynafit TLT Speed Turn 13/14? Broke one and can't find a replacement anywhere, it's a pity.
4/24/2022
Answer from jbo
 
Hi Gon, sadly it is not, but the Vertical ST toe plate is.

We sometimes get the Speed Turn or Classic toe plates in the used department.
Answer this question:

4/15/2021
Question from Mette
 
Hi, the spring for the ski stopper on my Radical ST broke. Is it possible to replace the base plate only?
4/15/2021
Answer from Teddy Young
 
Hey Mette, thanks for reaching out! Email us a few photos of the bindings(both broken and intact), and we'll see what the best option would be! Our address is "help@skimo.co".
Answer this question:

3/20/2021
Question from Ross
 
Hi. Do you have any Dynafit Radical 2.0 toe plates in stock at the moment? They do not seem to appear in the drop down parts list.
Regards, Ross
3/21/2021
Answer from Jeff
 
Ross, sorry, we have been out for some time.
Answer this question:

2/7/2021
Question from Rok Murgelj
 
Hi,

would plastic toe plates from Radical speed turn 92 be available as a spare part?

Do you maybe know what thickness are those?

Thanks,

Rok
2/8/2021
Answer from Tim
 
Hi Rok,
Yes, you want the "Radical ST 1.0". They are a bit over 6mm thick. You would want the 19mm screws to go with these.
Tim
Answer this question:

1/4/2021
Question from Galen H
 
Will any of these plates work as a riser for the Dynafit Speed Turn 2.0? If so, what size screws do I need to buy?
1/4/2021
Answer from Galen H
 
I was looking at the B&D classic 6.4 shim, but wondering if any of these will work
1/5/2021
Answer from jbo
 
Hi Galen, yes you want the Classic shims from B&D as there is not a Dynafit option. Thickness is a personal preference, but I support 6.4mm (1/4")!
Answer this question:

12/29/2020
Question from Matt Brodzinski
 
Hello. What plate would go along with the speed turn 2.0 from dynafit.
12/29/2020
Answer from jbo
 
Hi Matt, there are no toe plates included with that binding, but you could add shims.
Answer this question:

12/16/2020
Question from Alex P
 
La base delantera de la fijación Speed turn, la primera, no la 2.0, que es mas alta, ¿la tenéis?

Si es así, ¿la enviais a españa? ¿A que precio?

Gracias
12/18/2020
Answer from Patrick C
 
Alex,

No tenemos esta pieza y no podemos pedirla. ¡Lo siento, no podemos ser más útiles!
Answer this question:

1/3/2020
Question from Charlie
 
Does the Vertical ST toe plate come as a pair or individually? Also, does it include the metal crampon holder, or would I need to order those separately?
1/4/2020
Answer from Patrick C
 
Charlie,

Happy 2020! We sell the toe plates individually so order two if you need a full pair. The crampon holder is included with the Vertical ST plate. Have fun out there!

Patrick
Answer this question:

11/19/2019
Question from Kay
 
Hello

I managed to crack BOTH toe base plates for my TLT Comfort bindings last year (-30C will do that to plastic I guess...).
They look very similar to the TLT Classic or Vertical ST toe plates you have pictured. Will either of these work on the toe of the TLT Comforts?

Picture with dimensions of my existing base plate attached.
11/19/2019
Answer from Kayden P
 
NOW the picture is attached...
Please let me know if you have a plate that will fit. Thanks.
11/21/2019
Answer from Kayden P
 
Or will they possibly fit the TLT Classic base plates?
11/21/2019
Answer from jbo
 
Hi Kay, thank you for the awesome diagram! Yes, both the TLT Classic and Vertical ST plates will work as replacements for the Comforts. The Classics are a bit smaller and thinner than the Verticals, but they function the same.
11/21/2019
Answer from Kayden P
 
Interesting... I'd like to go with the classics to save a few dollars, but I just received a response from a Dynafit rep saying the Classic has wider set mounting screws.
I assume you are a Skimo employee? If so are you able to check them side by side to be sure that the classics also fit the Comforts? (Sorry for the hassle. Getting parts in Canada is proving very difficult)
Answer this question:

10/4/2019
Question from Sam
 
Hello, my vertical ft base plate has broken as shown but the metal tower connector piece is fine. Is it possible to put the metal piece into the speed radical base plate or just buy the plastic part of the base system?

Thanks you,
A college student trying to save some money
10/4/2019
Answer from Jacob L
 
Hey Sam! That same binding blew apart on me two winters ago while hiking into a yurt for a much-anticipated long weekend. At the time, I too was a college kid just trying to save some money, and I too posted pictures of the broken parts here on Skimo Co asking for help, so I understand the struggle! I ended up just buying a new Speed Turn 2.0 heel for $90, but your breakdown is different. It looks like you can get away with buying a Speed Radical Heel Base, which is a cheaper fix. Happy skiing!
Answer this question:

8/24/2018
Question from François M
 
Hello,
I am looking for a toe plate extension for Radical ST 2.0. I can see plates for ST, for FT 2.0, but did not find the ST 2.0 one. Do you have it?
Thanks!
François
8/24/2018
Answer from jbo
 
Hi François, there are no extensions for the ST 2.0. If you mean the rotating baseplate, that is listed as Radical 2.0 Toe Plate; it is the same for the ST 2.0 and FT 2.0.
8/26/2018
Answer from François M
 
Hello, thank you for your swift reply! I actually mean the carbon powerplate which goes around the toe binding. Not sure how it is called... It is at the top of the photo in attachment, just above the toe binding.
François
8/26/2018
Answer from jbo
 
Hi François, those are found in the drop list as "Radical FT 2.0 Toe Plate Extension". They are sold individually (x1).
8/27/2018
Answer from François M
 
Thank you! I will order the FT plate extension then. François
Answer this question:

2/22/2018
Question from larry
 
I need a solution for a crack in the plastic dynafit comfort baseplate that is going to be swapped to a new set of skis. Does maurelli have an antitwist option that would work with the comfort heels (I have had twist issues given large boot size). If not, then what can work as a heel plate - vertical st? (I may also forgo the brakes to try and remedy twisting)....thanks!
2/24/2018
Answer from jbo
 
Hi Larry, he does not. There is "too much useless plastic" in the way for his part to work. The Vertical ST heel plate should work for you.
Answer this question:

Earn store credit by writing reviews. Learn more.

Follow us on social media

View full screen version